had a situation where bricks on the third floor of our commercial building were starting to push outward near a window header. structural engineer said the lintel was corroded and expanding. BrickFlow pulled it, put in new steel, and repointed all the surrounding joints. wall is plumb again and the mortar color blends in pretty decent with the rest

We manage a retail strip in Wilmette and water was getting behind the facade on the north end, tenants kept reporting damp walls inside. turned out the mortar joints had basically disintegrated above the storefront windows. BrickFlow repointed that entire section and replaced one rusted lintel that was bowing. dry inside now even after that heavy rain last month

Water was getting into our third floor offices through the brick. Brickflow identified the bad joints immediately. They ground it out and sealed it up tight. No leak since the last storm.